The printing design of handbags includes size, printing and typesetting method, etc. the size needs to be determined according to the needs of customers, and its printing and typesetting method is the focus of handbag printing design. The commonly used methods of handbag printing design are mainly embodied in two aspects: molding method and paper opening method.
Molding method for printing design of handbag
When folding and forming after molding, some indentation lines fold the printing surface outward, while some indentation lines fold the printing surface inward. The four sides and four vertical lines at the bottom of the rectangle are easy to break during the use of the portable paper bag. These folds are folded outward on the printing surface.
In order to reduce the damage caused by the folding process of the portable paper bag, the back indentation should be used for the indentation of the portable paper bag, that is, the steel wire contacts the back of the paper during the indentation, so that the crease protrudes towards the printing surface. Since the indentation line should be aligned with the front image of the paper, it is required that the nip edge and side gauge edge during printing should be consistent with those during molding.
Paper opening method of Jinan handbag printing design
Because the mouth edge with a width of about 1cm on the printing sheet cannot be printed, and there are regular lines, color codes, etc. outside the scope of the finished product, for general printing pieces, the paper is first cut larger than the finished product, and then the surrounding waste paper edges are cut off with a paper cutter or die cutter during post printing processing. If the indentation processing of portable paper bags is to replace the indentation line with thick cardboard, die cutting and indentation should not be carried out at the same time, so portable paper bags generally only carry out indentation processing, not die cutting processing.
If the paper edge is cut off by the paper cutter before the indentation, the positioning accuracy of the indentation will be affected. Therefore, the general method is to cut the paper into the unfolding size of the finished product before printing, and only carry out indentation processing after printing, without cutting or die cutting, which not only saves the production cost of the template and the paper cost, but also makes the production process more efficient.
Molding method and paper opening method are two common forms in the printing design of handbags. A handbag needs both design and perfect printing to reflect the value of the product. Therefore, the design of the handbag should be simple and firm, with protection and storage functions.
The protection and firmness of handbags are inseparable from printing technology, which needs to be reflected in the printing design of handbags. The above is the relevant answer to the problem. You can refer to it. For more information about printing, please come to our website http://www.mtcctw.com Look!濟南印刷廠講解的內容 更多的內容 請咨詢公司官網http://www.mtcctw.com/